Extending the Use of Mobile Software and Handheld PDAs at the Airport

I have been away the past 10 days on vacation and noticed several uses for mobile handheld PDAs that I wanted to share.

The customer service folks at the Detroit airport, the people pushing the wheel chairs, were all using MC 70 handheld computers from Motorola/Symbol. This is the first time I have seen this category of worker using handheld PDAs and mobile software for dispatch. As I watched them, they would check them about every two minutes as new dispatches were sent out. It appeared that all dispatches were sent out, and available customer service staff would respond.

As I watched, I wondered if each dispatch had a unique work order number and was invoiced to the various airlines. I did not get the chance to follow-up, but that is how it appeared.

- Kevin Benedict

Mobile Handheld PDA Technology in a Slow Economy


Slow economic periods are a time for reflection for many companies. Understanding how to react to an economic downturn is one of the hardest tasks for a manager. The focus must be on accomplishing more with less and reducing inefficiencies. How can you provide more services per person, lower administrative costs and reduce expenses while at the same time providing quality work and good customer services? This article is intended to help the reader start the process of self-evaluation - to explore where inefficiencies may be lurking in your own unique business environment.

The use of PDAs, Handhelds and other mobile software technologies, in the context of field services automation, is most often driven by the following 12 business motivations:

1. Efficiencies in communicating information between the office and the remote service technician or jobsite
2. Efficiencies in planning and scheduling work based upon location, parts and expertise needed
3. Reducing fuel costs
4. Reducing travel time
5. Reducing time consuming and error prone data entry activities in the office
6. Increasing productivity – more average service calls per service technician in a day
7. Increasing service contract sales
8. Increasing equipment upgrade sales
9. Increasing collections with mobile invoicing, mobile printing of invoices and onsite collections
10. Improving inventory control and management - visibility to parts needed, the location of inventory and parts used on each job or service ticket
11. Reduced risks by reminding service technicians of safety hazards and safety procedures on the job
12. Improving management visibility into work done in the field to ensure quality services
These 12 business motivations become increasingly important during slow economic times. In rapid growth periods inefficiencies are often overlooked in a rush to keep up with the market and business growth, and hidden under the onslaught of new sales and revenues. However, when the economy slows down, it is time for companies to re-evaluate business processes in order to eliminate the inefficiencies and bad habits that have developed. Let’s now review some common and costly inefficiencies:

1. Inefficiency # 1 -Wasted time and fuel driving back and forth to the office to pick-up and deliver new work orders, tools and parts. With the high cost of fuel, reducing driving distances is a necessity. Can you dispatch a service technician directly from their home to a nearby jobsite? Can you make sure your service technician has the most common parts in the van before they travel to the jobsite?
2. Inefficiency #2 – Wasting time and fuel by being unprepared for the job and driving around looking for parts. Can you reduce travel time and fuel costs by being better prepared for the job before traveling? Can you ask customers for more information on the equipment such as brand, serial number, year, location, problem etc? Can you ask the customer for a digital photo of the equipment, serial number, etc., and email it before dispatching the service technician?
3. Inefficiency #3 – Sitting outside of a locked and vacant location wasting time waiting for the owner to arrive. Can you set up an automated phone call to let the customer know you are on the way? This avoids showing up at a vacant house or closed business and wasting time.
4. Inefficiency # 4 – Sending service technicians to a distant location, when another service technician is closer and wasting time and fuel. Can you use GPS tracking on the vans to better know the location of all service technicians so you can dispatch the closest and best service technician for the job?
5. Inefficiency #5 – Missed opportunities to sell more services, parts and equipment to the customer at the time of work. Can you automatically remind the service technician to promote service contracts by using a mobile handheld work order system? This will help increase service contract sales.
6. Inefficiency #6 – Poor scheduling and routing. Can you schedule service contract visits based on geographic location to reduce fuel costs and wasted travel time? Can a service technician complete more service calls in a day if they are routed more efficiently?
7. Inefficiency #7 – Driving large and heavy vehicles when not required. If you have a better understanding of the parts required for today’s service calls, can you take a smaller, more fuel efficient vehicle to the jobsite?
8. Inefficiency #8 – Poor cash management and collect processes. Can you collect money, swipe credit cards and print receipts from a mobile handheld device to improve collections at the jobsite? Are you wasting time, paper and postage sending out invoices weeks after the work was completed?
9. Inefficiency #9 – Too much administrative costs. Can you reduce the costs of data entry and administrative staff by automating the dispatch process by using wireless work order dispatch that is integrated directly with your work order management and accounting systems?
Every company, upon self-evaluation, will be able to identify additional inefficiencies that can be corrected and reduced. Many of the costly inefficiencies can be resolved by automating and mobilizing field services business processes.

What does an automated and "mobilized" work order system or service request dispatch and management system look like? A customer calls in to report a broken heating system. The office staff takes the phone call, enters the relevant information into the work order application on the desktop computer which then creates a unique work order and number.
The work order database application, with GIS integration, can compare the location of each service technician to determine which service technician is closest to the work location. The dispatch system can also look at the estimated time the nearby service technicians are committed to completing their existing assignments. Once the appropriate service technician is identified, the work order is dispatched to the handheld computer used by the service technician. Included in the electronic work order is driving directions from his/her current location to the next job location. In addition to the work order information, warranty, repair, users manual, maintenance history and product information on file can also be dispatched to the handheld computer for reference and parts inventory management.

Once the service technician arrives at the location, he opens the work order on the handheld computer. Opening the work order automatically captures the service technician's name, the date/time stamp and the GPS coordinates of the jobsite and enters them into the mobile application’s work order.

Next the service technician examines the broken heating system and determines which parts need replaced. He can pull out his handheld computer and check whether he has the needed parts in his vehicle inventory, if not, it can automatically search for nearby service vehicles that may contain the part (GPS tracking enables this). If another nearby service vehicle is determined to have the required part, then driving directions can be sent.

When the service technician arrives at the service vehicle with the needed part, then the part is scanned using a bar code scanner in the handheld computer to log its removal from the vehicle's inventory and assigns it to the appropriate work order number.

Back at the work site, the service technician runs into a challenge. He has never worked on this model before and needs advice. He snaps a digital photo of the equipment and synchronizes it back to the office. His supervisor reviews the photo and calls him with advice.

Once the work is completed, the service technician signs his name on the handheld computer screen, and has the customer sign the work order screen as well. The service technician prints an invoice on a mobile printer and collects the payment or swipes the customer’s credit or debit card. The collection is noted on the mobile work order and synchronized back to the office.

As soon as the work order is completed and synchronized, the mobile application reminds the service technician to promote a 2 year service contract. The service technician reviews the details with the customer and signs them up for a 2 year service contract. Next, the work order system reviews job locations and priorities and assigns the next optimized work order to the field service technician.

Status of the Mobile Business Application Market for PDAs and Handhelds


I talk a lot. I talk to many other executives who work in the wireless mobility, handheld computer, enterprise software and PDA markets. We share views and experiences from these industries. Here is a summary of what I am hearing these days:


  • The handheld barcode scanner market is hurting. The traditional warehouse and retail markets are not spending money. With shrinking sales, the handheld barcode scanner market is suffering from decreasing margins and more competition

  • Sales people in the handheld barcode scanner industry are leaving under pressure to increase sales in a tough market with shrinking opportunities

  • Tradeshows and conferences are suffering due to the high costs of fuel and travel in a slow economy

  • The market segment for wireless mobile business software applications (where MobileDataforce plays) is the fastest growing segment of the wireless mobility market. The field work force continues to suffer from a large amount of inefficiencies that companies must fix in tough times in order to be competitive. Thus this market is growing when many other segments are not

Custom Mobile Applications for PDAs and Handhelds or Off-The-Shelf?


Definition of "Off-The-Shelf" software: A software application that is pre-developed and can be used by many companies in the same industry.
Our clients often ask the following question: Should they buy a mobile application pre-developed for PDAs and handhelds for less money? The answer may be yes if they have a business exactly the same as many other companies and mobile software is available that fits it. The challenge most companies have is that some percentage of their business processes are unique. Some portion of their enterprise software or database applications have been configured specifically for their own unique preferences. Perhaps competitive business processes are the secret to their success. If this is the case - it is highly likely that a customized mobile application may be both necessary and advantageous.
Often successful businesses have developed unique business processes, unique methodologies and specific techniques that provide competitive advantages. If you want to continue these practices and ensure your mobile handheld business solutions support these, then a customized mobile software application for your field workforce may be your answer.
MobileDataforce provides mobile software solutions that enable companies to rapidly develop customized mobile applications that support your competitive business processes and customized back-office software applications.
- Kevin Benedict

Mobile PDA Solutions & Medicine in Ethiopia

This picture is of MobileDataforce's consultant, Will Hannold at Bete Giorgis in Lalibela in Ethiopia. He was working on a mobile handheld PDA software project to track the distribution of medicines to clinics. This is a government sponsored project that enables the development of a solid supply chain management system to be deployed throughout the country using mobile PDAs, handheld barcode scanners and enterprise mobile software technologies from MobileDataforce.

Smart Meters, Mobile Handheld PDA Solutions & Utilities



MobileDataforce is working on a number of very powerful mobile handheld PDA applications to help electrical and water utilities manage the maintenance, installation and repair of meters. These applications contain several different software components including:

  • Work Orders
  • Digital photos of meters before, during and after installation
  • Safety inspections and reporting
  • Mapping/GPS
  • Inventory
    Logistics

These applications are integrated with mapping software to enable the user to view current, future and past jobsite locations.

MobileDataforce is working on many custom mobile software projects for water and electrical utility companies and contractors both in North America, South Africa and in Europe. Please visit our website or contact us if you would like to discuss your mobile field data collection or work order project requirements.

Featured Post

Leadership Advice from a Futurist - A Reading

Leadership is hard.  So for all the leaders and want-to-be leaders out there, here is some advice that I hope you will find useful. ***...